Error Codes For Model# ZL3 Fresh Alpine Air purifier
So you purchased your air purifier from Alpine Air Technologies some time ago and you’ve been nothing but pleased with the functionality and effectiveness of the Model ZL3 Fresh Air Purifier. The air feels pure, clean, clear, fresh, and most importantly, you’re finally able to breathe normally again. However, after some time, it’s expected that your air purifier, not just of Alpine, but any air purifier, will run into some trouble in functioning at a high level over a long period of time. Repair and maintenance is required for your air purifier to be running up to speed always. Here, we will discuss 3 error codes you may have received on you ZL3 Fresh Air Purifier.
The First error code is E001. This means that the ozone plate needs to either be cleaned or replaced. You can visit out FAQ page to check whether or not you need to simply clean/replace the plate by following some quick guidelines recommend by our mechanical and repair team.
The second error code is E002. This means that the UV bulb needs to be replaced. After some time, the UV bulb will usually diet out due to battery lifespan. The bulb is routinely replaced by all users.
The third error code is E003, which means that the back carbon filter needs to be cleaned. Again, after some time, the carbon filter gets filled with bacteria and dust, and accumulation may prevent your unit from operating at full potential. It’s important you do not ignore this aspect of your unit as doing so will result in less efficient sensitization, or your unit may malfunction even.
To replace the ozone plate, UV bulb, or back carbon filter, please visit our parts page.